Anqidi 6HP 2-Stroke Outboard Motor Fishing Boat Engine Tiller Shaft Water Cooling CDI System
Free U.S. shipping · Shipping details
Specifications
- Material: Aluminum Alloy
- Color: Black
- Surface Treatment: Spray Paint
- Assembly Required: No
- Number of Items: 1
- Engine: 2-stroke 6hp
- Displacement: 102cc
- Gear Ratio: 2.08(27:13)
- Number of Cylinder: 1
- Max. Output: 4.4KW
- Max. Speed: 4500-5500r/Min
- Noise: About 80DB
- Gear Positions: F-N-R
- Ignition System: CDI
- Cooling System: Water-cooling
- Control System: Tiller Control
- Starting System: Manual Start
- Gasoline: No.92 Lead-free Gasoline
- Fuel Type: Mixed Oil (50 Gasoline: 1 2-stroke Engine Oil)
- Trim And Tilt System: Manual Tilt
- Fuel Tank Capacity: 2.5L/0.66gal
- Fuel Consumption Rate: 2.5L/0.66gal/h
- Bore*Stroke: 5.5*4.3cm/2.16*1.7in
- Propeller Diameter: 18cm/7in
- Handle Length: 36cm/14.17in
- Adaptive Transom Plate Height: — 4cm/17.32in
- Gross Weight: 24.15kg/53.24lbs
- Net Weight: 20.55kg/45.3lbs
- Product Size: 105*48*24cm/41.3*18.9*9.4in
- Package Size: 110*37*54cm/43.3*14.56*21.26in
Package Included
- 1x Outboard Motor
- 1x Flameout Rope
- 1x Tool Kit
- 1x Fuel Oil Mixing Bottle
- 1x Funnel
- 1x English Manual
- 1x English Operation Instructions
- All Accessories for Assembly
Notes
1.Please carefully read the manual and strictly follow the precautions to have a better experience.
2.Please measure the height of your boat before purchasing to ensure suitability for this product.
3.Please start the motor in the water. If the motor stops circulating water, please stop using it immediately and check the impeller of the water pump to see if the water outlet is blocked.
4.Please note that this product should use a mixture of two-stroke engine oil and 92 # unleaded gasoline. The running-in period of the new machine is 10 hours, during which the fuel ratio is 30L (7.93 gal) of gasoline to 1L (0.26 gal) of engine oil. After 10 hours, the ratio is 50 liters (13.21 gallons) of gasoline to 1 liter (0.26 gallons) of oil.
5.Please note that the emergency shutdown rope should be inserted when the outboard motor is started, and the other end should be wrapped around your wrist or belt.
6.Please do not drive too fast during the running-in period. After the running-in period, the gear oil needs to be replaced, and the second replacement time is about 100 hours or 6 months later.
7.Please do not leave this product outside until the cooling water is completely used up. Otherwise, water will enter the cylinder through the exhaust port, leading to engine failure. After cruising in seawater or turbid water, please clean the outboard motor with fresh water and cool the water channel with fresh water. The engine should be stored in a dry and well-ventilated place, and avoid direct exposure to sunlight.
8.If not in use for a long time, please thoroughly clean the gasoline in the fuel tank.
9.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
Shipping
Standard shipping is free on every order to all 50 states.
Orders are processed within 1-2 business days before dispatch. Our order cutoff is 2:00 PM U.S. Central Time (CT, observing CST/CDT as applicable), Monday through Friday, excluding U.S. federal holidays.
Delivery typically takes 2-4 business days after dispatch to all 50 states, including Alaska and Hawaii. Transit estimates do not include processing time; delivery times are estimates, not guarantees.
Returns
Return eligible items within 30 days of delivery.
Condition: Items must be unused, in their original packaging, and in resalable condition.
Return Shipping and Fees: Return shipping is free. A prepaid return label ships with your order, and we do not charge restocking fees.
Dimensions & Specs
Product photos show scale and set contents — use them to judge sizes and counts before ordering. Need a measurement or piece count confirmed? Email support and we'll check the set for you.
Care Instructions
Store paper decorations flat in a dry place away from sunlight. Keep balloon and garland kits sealed until setup day, and handle honeycomb and tissue pieces by their edges.












