Skip to content
FREE U.S. SHIPPING

Rockville DBM25 1400 Watt 2 Channel Marine/Boat Amplifier Amp w/Silicone Covers

Original price was: $51.98.Current price is: $36.49. USD

Free U.S. shipping · Shipping details

Video of DBM25:

What’s In The Box:

(1) DBM25 Amplifier
Birth sheet with Tested Power
Mounting Screws
Warranty Card
Owner’s Manual

Description:

The all new dB marine series of amplifiers gives you the best of both worlds! We
took the sound of our best selling series of dB car amps and we added the best
marine grade parts so that they will last forever and withstand even the
harshest conditions on the water.

We went a little overboard (no pun intended) to make this amp marine ready. We
conformal coated the PCB board with a waterproof glue that is painted on to
protect the circuitry. We then added waterproof silicone covers over the
terminals so that water can never get into the amp. The heat sink, including the
bottom plate, is made of aluminum which is rustproof. The end panels, all of the
internal mounting screws and hardware of the amp are made of stainless steel and
are rustproof as well. Even after many years of use the amp will be rust free
and operate like new!

The DBM25 is a 2-Channel amplifier with 1,500 watts peak output and 375 watts
Dyno Certified power. Here at Rockville we offer the best value in car audio. We
therefore want to make it easy for you to compare our products to any brands on
the market. The peak rating can be used to compare with brands who use peak
ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can
be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

Features:

Rockville DBM25 1500w Peak/370w Dyno-Certified RMS Class-AB 2-Channel Marine
Amplifier With Terminal Covers
Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use
these ratings when comparing with top brands such as Kicker, Rockford Fosgate,
etc)
2 Ohm: 185 Watts x 2 Channel
4 Ohm: 125 Watts x 2 Channel
4 Ohm Bridged: 370 Watts x 1 Channel
Peak: (Use these ratings when comparing with the top budget brands such as Boss,
Power Acoustik, etc)
2 Ohm: 750 Watts x 2 Channel
4 Ohm: 500 Watts x 2 Channel
4 Ohm Bridged: 1500 Watts x 1 Channel
Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
Adjustable Low Pass Filter: 50 Hz – 250 Hz
Adjustable High Pass Filter: 60 Hz – 1.2 kHz
Fully Adjustable 12dB Bass Equalizer
Adjustable Input Level Control
Minimum THD at Rated Power: <0.05%
S/N Ratio: >90 dB
Frequency Response: 10 Hz – 50 kHz
Damping Factor: >100 @ 100Hz
(2) 25 Amp ATC Fuses
Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)
Waterproof silicone covers for end panels
Rustproof Aluminum heat sink with white paintedfinish
Stainless steel end panels are rustproof
All screws and mounting hardware are stainless steel and rustproof
Bottom panel is aluminum and rustproof
High-Speed MOSFET Power Supply
Studio-Grade Bipolar Output Stage Transistors
Product Dimensions (W x H x L): 9" x 2.4" x 15.1" inches
Product Weight: 7.7 Lbs

<a href="http://www.rockvilleaudio.c

  • Rockville DBM25 1500w Peak/370w Dyno-Certified RMS Class-AB 2-Channel Marine Amplifier With Terminal Covers.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 185 Watts x 2 Channel. 4 Ohm: 125 Watts x 2 Channel. 4 Ohm Bridged: 370 Watts x 1 Channel. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 2 Ohm: 750 Watts x 2 Channel. 4 Ohm: 500 Watts x 2 Channel. 4 Ohm Bridged: 1500 Watts x 1 Channel.
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Adjustable Low Pass Filter: 50 Hz – 250 Hz. Adjustable High Pass Filter: 60 Hz – 1.2 kHz. Fully Adjustable 12dB Bass Equalizer. Adjustable Input Level Control.
  • Minimum THD at Rated Power: 90 dB. Frequency Response: 10 Hz – 50 kHz. Damping Factor: >100 @ 100Hz. (2) 25 Amp ATC Fuses. Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue).
  • Waterproof silicone covers for end panels. Rustproof Aluminum heat sink with white paintedfinish. Stainless steel end panels are rustproof. All screws and mounting hardware are stainless steel and rustproof. Bottom panel is aluminum and rustproof. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Product Dimensions (W x H x L): 9″ x 2.4″ x 15.1″ inches. Product Weight: 7.7 Lbs
Shipping

Standard shipping is free on every order to all 50 states.

Orders are processed within 1-2 business days before dispatch. Our order cutoff is 2:00 PM U.S. Central Time (CT, observing CST/CDT as applicable), Monday through Friday, excluding U.S. federal holidays.

Delivery typically takes 2-4 business days after dispatch to all 50 states, including Alaska and Hawaii. Transit estimates do not include processing time; delivery times are estimates, not guarantees.

Returns

Return eligible items within 30 days of delivery.

Condition: Items must be unused, in their original packaging, and in resalable condition.

Return Shipping and Fees: Return shipping is free. A prepaid return label ships with your order, and we do not charge restocking fees.

Dimensions & Specs

Product photos show scale and set contents — use them to judge sizes and counts before ordering. Need a measurement or piece count confirmed? Email support and we'll check the set for you.

Care Instructions

Store paper decorations flat in a dry place away from sunlight. Keep balloon and garland kits sealed until setup day, and handle honeycomb and tissue pieces by their edges.