Skip to content
FREE U.S. SHIPPING

CertainTeed WinterGuard Pro HT Waterproofing Underlayment

Original price was: $92.54.Current price is: $36.51. USD

Free U.S. shipping · Shipping details

Count

The CertainTeed Winterguard HT Waterproofing Underlayment is an advanced, self-adhering, high tack, high-temperature membrane that is made to withstand high roof temperatures up to 250°F under the metal roofs. It is designed for application underneath low slope shingle, low slope tile, low slope metal, and low slope slate roofs and is composed of a sturdy support that is impregnated and coated with asphalt that is SBS-modified. Winterguard HT has a film on the top that is tear-resistant and will not scratch the metal roofing that it is placed under. The bottom surface of the Winterguard is adhesive and it is covered with a release film that is silicone-coated. This release film is also split down the center horizontally for easier application. Winterguard can not be left uncovered for more than 6 months.Please Note: WinterGuard is a vapor barrier. Therefore, if WinterGuard is applied over a majority of the roof deck, proper deck ventilation must be provided. If WinterGuard must contact sealants or cements, use solvent-based products sparingly, following manufacturer’s instructions carefully. Excessive use of solvent-based adhesives can damage WinterGuard’s polymer modified asphalt coating. Do not use silicone-based sealants, as they do not maintain adequate long-term adhesion to asphalt.

  • Do not expose WinterGuard permanently to sunlight. Cover WinterGuard as soon as possible with a permanent roof surface. The maximum exposure time is 6 months.
  • Do not apply WinterGuard over shingles or underlayment of any sort.
  • WinterGuard may become slippery under certain weather conditions. When this occurs, avoid walking or crawling on the product.
  • WinterGuard will not adhere to wet or cold surfaces. For cold weather tack down, use only roofing nails. Under no circumstances should staples be used with WinterGuard products.
  • Store WinterGuard rolls in their packaging in a dry, protected area at a temperature not exceeding 110 degrees F.
  • Low-slope application: WinterGuard HT can be applied beneath shingles, slate and mechanically fastened tile to acceptable decks with slopes of 2″/12″ or greater and beneath metal to acceptable decks with slopes of 0.5″/12″ or greater.
  • Seals the roof against infiltration of water into the building due to ice dams and wind-driven rain and seals water-tight around nails.
  • WinterGuard is warranted against manufacturing defects and to remain watertight for the same period as the warranty duration carried by the roofing product applied above it — up to a maximum of 50 years.
  • Do not expose WinterGuard permanently to sunlight. Cover WinterGuard as soon as possible with a permanent roof surface. The maximum exposure time is 6 months.
  • Do not apply WinterGuard over shingles or underlayment of any sort.
  • WinterGuard may become slippery under certain weather conditions. When this occurs, avoid walking or crawling on the product.
  • Low-slope application: WinterGuard HT can be applied beneath shingles, slate and mechanically fastened tile to acceptable decks with slopes of 2″/12″ or greater and beneath metal to acceptable decks with slopes of 0.5″/12″ or greater.
  • Seals the roof against infiltration of water into the building due to ice dams and wind-driven rain and seals water-tight around nails.
  • WinterGuard is warranted against manufacturing defects and to remain watertight for the same period as the warranty duration carried by the roofing product applied above it — up to a maximum of 50 years.
  • Roll Length: 65 feet
  • Roll Width: 3 feet
  • Roll Coverage: 195 square feet
  • Roll Weight: 53 pounds /roll
  • Roll Thickness: 45 millimeters typical
  • Compliance Codes: Meets ASTM D1970
Shipping

Standard shipping is free on every order to all 50 states.

Orders are processed within 1-2 business days before dispatch. Our order cutoff is 2:00 PM U.S. Central Time (CT, observing CST/CDT as applicable), Monday through Friday, excluding U.S. federal holidays.

Delivery typically takes 2-4 business days after dispatch to all 50 states, including Alaska and Hawaii. Transit estimates do not include processing time; delivery times are estimates, not guarantees.

Returns

Return eligible items within 30 days of delivery.

Condition: Items must be unused, in their original packaging, and in resalable condition.

Return Shipping and Fees: Return shipping is free. A prepaid return label ships with your order, and we do not charge restocking fees.

Dimensions & Specs

Product photos show scale and set contents — use them to judge sizes and counts before ordering. Need a measurement or piece count confirmed? Email support and we'll check the set for you.

Care Instructions

Store paper decorations flat in a dry place away from sunlight. Keep balloon and garland kits sealed until setup day, and handle honeycomb and tissue pieces by their edges.